Table of Contents
Advertisement
Media receiver unit
Rear Panel
Jack
1 CONTROL S OUT
2 AUDIO OUT
(VAR/FIX) L/R
3 SUB WOOFER OUT
(VAR)
4 VHF/UHF
5 TO CONVERTER
6 AUX
7 MONITOR OUT
8 DVI-HDTV IN
DVI-HDTV
AUDIO R/L
(VIDEO IN 6)
9 DISPLAY SIGNAL
OUT
0 S VIDEO IN 1/3
qa VIDEO IN 1/3
VIDEO/
L-AUDIO-R
18
AUDIO IN
R–AUDIO–L
HD/DVD IN
( 1080i / 720p / 480p / 480i )
Description
Allows the TV to send remote control signals to other Sony infrared-controlled audio or
video equipment that has the CONTROL S function.
Connects to the left and right audio input jacks of your audio or video equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
Connects to the input jack of your sub woofer.
Primary RF input that connects to your VHF/UHF antenna or cable.
Connects to your cable box input jack. This VHF/UHF output jack lets you set up your TV
to switch between scrambled channels (coming through a cable box) and unscrambled cable
channels. Use this jack instead of a splitter to get better picture quality when you need to
switch between scrambled and unscrambled cable channels. For details, see pages 24 and 25.
Auxiliary RF input that connects to your antenna, CATV cable, or cable box output jack.
This is convenient if you are using two VHF/UHF sources (antenna, CATV cable, or cable
box). For details, see pages 24 and 25.
Lets you record the program you are watching to a VCR. When two VCRs are connected,
you can use the TV as a monitor for tape-to-tape editing (not available with 480p, 720p, or
1080i when the input is set to VIDEO 4-6).
Can accommodate a copy-protected digital connection (HDCP*) to other devices (such as
digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is
compliant with the EIA-861 standard and is not intended for use with personal computers.
See the instruction manual that came with your equipment for details about connecting and
using it with the TV.
Use a DVI-D single link cable.
Connects to the display input jack of the display unit by using the supplied display interface
cable.
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (qa) or
VHF/UHF (4) connections.
Connect to the composite A/V output jacks on your VCR or other video component. A third
component A/V input jack (VIDEO 2) is located on the front panel of the Media receiver
unit. These video connections provide better picture quality than the VHF/UHF (4)
connections.
CONTROL S
R–AUDIO–L
AUDIO
SUBWOOFER
OUT
OUT
(VAR/FIX)
(VAR)
OUT
AV MOUSE
4
1
5
3
Y
P
P
R–AUDIO–L
VIDEO
S VIDEO
B
R
VIDEO IN
TO
VHF/UHF
AUX
CONVERTER
R–AUDIO–L
VIDEO S VIDEO
MONITOR OUT
DVI–HDTV
R–AUDIO–L
6
~
AC IN
DVI–HDTV IN
WHITE
BLACK
DISPLAY SIGNAL OUT
Advertisement
Table of Contents
