Table of Contents
Advertisement
Setting Up the Channel List
Using Auto Setup
After you finish connecting your TV, you need to run Auto Setup to set up
your channels. The Auto Setup screen appears when you turn on your TV for
the first time after hooking it up. If you do not want to set up the channels at
this time, you can do it later by selecting the Auto Program option in the
Channel Menu (see page 84).
The Auto Setup feature does not apply for installations that use
a cable box for all channel selection.
1
Press
to turn on the TV.
POWER
2
Press
on the remote control repeatedly until the
FUNCTION
lights up.
3
To continue running Auto Setup, press
CH–
.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1
Press
POWER
to turn on the TV.
2
RESET
Hold down
3
Press
on the Media receiver unit. (The TV will turn itself off,
POWER
then back on.)
4
Release RESET.
. To exit Auto Setup, press
CH+
on the remote control.
indicator
TV
49
Advertisement
Table of Contents
