Media Receiver Unit Rear Panel - Sony WEGA KDE42XBR950, KDE50XBR950, KDE55XBR950, KDE61XBR950 Operating Instructions Manual

Media Receiver Unit
Rear Panel
Jack
1 S VIDEO IN 1/3
2 HD/DVD IN 4/5
(1080i/720p/480p/
480i)
3 SUB WOOFER OUT
(VAR)
4 CONTROL S
IN/OUT
5 DIGITAL AUDIO
(OPTICAL) OUT
(PCM/DOLBY*
DIGITAL)
6 i.LINK 1/3
7 VHF/UHF
8 CABLE
9 DISPLAY SIGNAL
OUT
q; DVI-HDTV IN
DVI-HDTV/
L-AUDIO-R
(VIDEO IN 6)
qa AUDIO OUT
(VAR/FIX) L/R
qs VIDEO IN 1/3
VIDEO/
L-AUDIO-R
* "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
22
1
S VIDEO
HD/DVD IN
(1080i/720p/480p/480i)
Y
VIDEO
P
B
L
(MONO)
AUDIO
R
P
R
1 VIDEO IN 3
qs
Description
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (qs) or
VHF/UHF (7) connections.
Connect to your DVD player's or digital set-top box's component video (Y, P
audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (1),
the VHF/UHF (7) or the composite video (qs) connections.
Connects to the input jack of your sub woofer.
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-controlled audio or video equipment that has the CONTROL S function.
Connect to the optical audio input of a digital audio component that is PCM/Dolby Digital
compatible.
Used for connecting i.LINK-equipped devices. These terminals are not intended for
connection with personal computers.
RF input that connects to your VHF/UHF antenna or cable box.
RF input that connects to your cable signal.
Connect to the DISPLAY SIGNAL IN jacks of the display unit by using the supplied
display interface cable.
Connect to the output of your interface-compatible digital set-top boxes. This DVI-HDTV
NOT INTENDED FOR USE WITH PERSONAL COMPUTERS
input terminal is
is compliant with the EIA-861 standard. See the instruction manual that came with your
equipment for details about connecting and using it with the TV.
Use a DVI cable.
Connects to the left and right audio input jacks of your audio or video equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
Connect to the composite A/V output jacks on your VCR or other video component. A third
composite A/V input jack (VIDEO 2) is located on the front panel of the media receiver
unit. These video connections provide better picture quality than the VHF/UHF (7)
connections.
2 3 4 5
SUB WOOFER
OUT (VAR)
Y
OPTICAL OUT
AUDIO AUDIO CONTROL S
L P L
B
IN
L
R OUT
R P R
R
AUDIO OUT
4 5
DVI–HDTV
(VAR/FIX)
qa 0
6 7
CABLE
VHF/UHF
S400
(TS/DV/MICROMV)
i.LINK
R - AUDIO - L
~
WHITE BLACK
AC IN
6
DVI–HDTV IN DISPLAY SIGNAL OUT
9
, P
B
8
) and
R
and