Rear Panel - Sony WEGA KE-37XS910 Operating Instructions Manual

Rear Panel
RF input that connects to your VHF UHF antenna or cable box.
Connects to your cable box input jack. This VHF UHF output jack lets you set up your TV
to switch between scrambled channels (coining through a cable box) and unscrambled cable
T
channels. Use this jack instead of a splitter to get better picture quality when you need to
switch between scrambled and unscrambled cable channels. For details, see page 25.
Auxiliary RF input that connects to your antenna, CATV cable, or cable box output jack.
This is convenient if you are using two VHF UHF sources (antenna, CATV cable, or cable
box). For details, see pages 24 and 25.
Connect to the composite A.V output jacks on your VCR or other video component. A third
composite AV input jack (VIDEO IN 2) is located on the left side panel. These video
T
connections provide better picture quality than the VHF IJHF ( ) connections.
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has S
VIDEO. S VIDEO provides better picture quality than either composite video ( ) or
VHFUHF () connections.
Can accommodate a copy-protected digital connection (HDCP*) to other devices (such as
digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is
compliant with the EIA-861 standard and is not intended for use with personal computers.
See the instruction manual that came with your equipment for details about connecting and
using it with the TV.
Use a DVI-D single link cable.
............................................................................................................. Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
: infrared-controlled audio or video equipment that has the CONTROL S function.
: Connect to your DVD player's or digital set-top box's component video (Y, PB, PR) and
audio (LR) jacks. Component video provides better picture quality than , , or.