Yamaha Grand filano LTF125-I Owner's Manual page 28

Smart key system (LTF125-A)
ON (on)
1 2
4
1. Push.
2. Turn.
All electrical circuits are supplied with
the power, and the engine can be start-
ed.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.
EAU76500 3. While the smart key system indi-
cator light is on, turn the main
switch to "ON". All of the turn sig-
nal lights flash twice and the vehi-
cle power turns on.
TIP
If the vehicle battery voltage is
low, the turn signal lights will not
flash.
See "Emergency mode" on page
9-35 for information on turning the
vehicle power on without the
smart key.
OFF (off)
1
1. Turn.
All electrical systems are off.
To turn the vehicle power off
1. With the smart key turned on and
2. The turn signal lights flash once
TIP
When the main switch is turned to
"OFF" but the smart key cannot be
confirmed (the smart key is either out-
side operation range or has been
turned off), the beeper will sound for 3
seconds and the smart key system in-
dicator light will flash for 30 seconds.
EAU76510
OPEN (open)
The fuel tank cap lid and seat can be
opened.
1. With the smart key on and within
4-8
within operating range, turn the
main switch to "OFF".
and the vehicle power turns off.
During this 30 seconds, the main
switch can be freely operated.
After 30 seconds, the vehicle
power will turn off automatically.
To turn the vehicle power off im-
mediately, push the main switch
knob four times within 2 seconds.
operating range, push the main
switch knob.
EAUV0800