Smart Key - Yamaha Grand filano LTF125-I Owner's Manual

Smart key

1. Smart key indicator light
2. Smart key button
To turn the smart key on or off
Push the smart key button for approxi-
mately 1 second to turn the smart key
on or off. When the smart key is turned
off, the vehicle cannot be operated
even if the smart key is within operating
range. To operate the vehicle, turn the
smart key on and bring it within operat-
ing range.
To check whether the smart key is
turned on or off
Push the smart key button to confirm
the current operating status of the
smart key.
EAU76472 If the smart key indicator light:
Short flash (0.1 seconds): The
smart key is turned on.
1
Long flash (0.5 seconds): The
smart key is turned off.
Remote answer-back function
2
Push the smart key button to operate
the answer-back function remotely.
The beeper will sound twice and all of
the turn signal lights will flash twice.
This feature is convenient for locating
your vehicle in a parking lot and other
areas.
Operating range of the answer-back
function
The approximate operating range of
the answer-back function using the
smart key is shown in the following il-
lustration.
As the smart key system uses weak ra-
dio waves, the operating range may be
affected by the surrounding environ-
ment.
Smart key system (LTF125-A)
To turn the answer-back beeper on
or off
The beeper, which sounds when the
answer-back function is operated, can
be turned on or off according to the fol-
lowing procedure.
1. Turn the smart key on and bring it
2. Turn the main switch to "OFF",
3. Within 9 seconds of pushing the
4. When the beeper sounds, the set-
4-5
within operating range.
and then push the main switch
knob once.
knob, push and hold the knob
again for 5 seconds.
ting is complete.
If the beeper:
Sounds twice: The beeper is
turned off.
Sounds once: The beeper is
turned on.
4