Brake Lever - Yamaha Grand filano LTF125-I Owner's Manual

Dimmer switch " / "
Set this switch to " " for the high
beam and to " " for the low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Start switch " "
With the sidestand up, push this switch
while applying the front or rear brake to
crank the engine with the starter. See
page 8-1 for starting instructions prior
to starting the engine.
EAU12401
Stop and Start System switch " /
To turn on the Stop and Start System,
set the switch to " ". To turn off the
Stop and Start System, set this switch
EAU12461 to " ".
A
"
". When
EAU12501
EAU12722
Instrument and control functions
EAU76391

Brake lever

A
A
A
1. Front brake lever
The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
6-11
EAU12892
1
6