Resetting The Ampere Hours Charged; Errors - Go Power MAXIMUM GP-PWM-10 User Manual

_________________________________________________________________________________

7.5 Resetting the ampere hours charged

To reset the count of ampere hours charged, toggle to the ampere hours
charged. Press and hold the A Button for 6 seconds to reset the counter
to zero.

7.6 Errors

Over Voltage
If the GP-PWM-10 experiences
a battery over voltage (15.5V),
the controller will stop operating
and the display will begin to
flash with all icons. The
controller will resume operating
when the error is cleared.
Icons Displayed: All symbols
Low Voltage
If the battery state of charge
reaches 0%, the battery SOC
symbol will show the text "LOW"
beneath it. The controller will
continue operating in this
condition and will only stop
operating if the voltage drops
below 6 volts.
Icons Displayed: Battery SOC
Symbol, LOW
GP-PWM-10
14
© 2017 Go Power!®