Go Power GP-RVC-R Quick Start Manual

Button Operation
Interface Status Button
ITEM
【UP】
【DOWN】
Main Menu
--
[MENU3]
【ENTER】
【BACK】
【UP】
Status Menu
【DOWN】
--
[MENU4] to
【ENTER】
[MENU8]
【BACK】
【UP】
Not in
【DOWN】
Setting
Mode
【ENTER】
【BACK】
Setting Menu
【UP】
[MENU9] to
[MENU17]
In Setting
Mode 【DOWN】
【ENTER】
【BACK】
Press Actions
Short or
No actions
long Press
Short or
No actions
long Press
Enter status interface
Short press
[MENU4]
Enter setting
Long press
interface [MENU9]
Short or
No actions
long Press
[MENU8]->[MENU7]-
Short press
>[MENU4]
[MENU4]->[MENU5]-
Short press
>[MENU8]
Enter status menu
Short press
[MENU4]
Enter main menu
Short press
[MENU3]
[MENU17]->[MENU1
Short press
6]->[MENU9]
[MENU9]->[MENU10
Short press
]->[MENU17]
Short press Enters Setting Mode
Back to main screen
Short press
[MENU3]
The flashing
Short press parameter is
incremented by 1
The flashing
parameter is
Short press
decreased by one
increment
Short press Save the setting
Short press No save the setting
Front View
Side View
No.
1
2
3
4
5
6
Warnings
Electricity can be very dangerous.Installation should be performed only by a licensed electrician or
Disconnect all power sources
qualified personnel.
Observe all safety precautions of the battery manufacturer when handling or working around
Battery and wiring safety
batteries. When charging, batteries produce hydrogen gas, which is highly explosive.
Ensure all connections are tight and secure.Loose connections may generate sparks and heat. Be
Wiring connections
sure to check connections one week after installation to ensure they are still tight.
Wear protective eyewear and appropriate clothing during installation. Use extreme caution when
Work safely
working with electricity and when handling and working around batteries.
Find tech tips, manuals and support at gpelectric.com
GP-RVC-R
Solar Controller Remote
Quick Start Guide
1
2
5
6
Descrip�on
LCD screen
Back Bu�on
Enter Bu�on
Down Bu�on
Up Bu�on
RJ12 Connectors
3
4