Watching The Tv - Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual

I Press POWER on the remote control.
POWER
Watching the TV
MUTING
2
Tip
When the (D (Power on Stand by) LED goes off, press (D
(Power) on the TV.
Select the desired channel using the 0-9 and ENT
(enter) buttons.
Press 0-9 to select a channel. The channel
changes after 2 seconds. Press ENT (enter) to
select immediately.
Use the CH +/- buttons to scan through the
channels.
CH
or
Tip
When you press and hold CH + or , the channel number
will change rapidly.
3 Adjust the volume using the VOL +/- buttons.
V0L
Other button operations
Press To
MUTING Mute the sound. Press it again or press
VOL + to restore sound.
DISPLAY Press once to display the current channel
number, and channel label. If set, the
current channel number will display for
10 seconds.
JUMP Jump back and forth between two
channels. The TV alternates between the
current channel and the last channel
selected using the 0-9 buttons.
Tip
You can adjust the volume by referring to the value beside the
volmne indicator (on screen).
3
4O