Connecting An Audio Receiver - Sony KE-42M1 Operating Instructions (primary manual) Operating Instructions Manual

Connecting an Audio Receiver
Disconnect all power sources before making any connections.
Using an AUDIO cable, connect the TV's AUDIO OUT jacks to the audio
receiver's AUDIO IN jacks.
Rear of TV
iiii i i! i!iiiiiiii ,,
.......... :
AUDIO-L (white)
AUDIO-R (red)
-- AUDIO cable
(not supplied)
Audio
input
6
Audio receiver
(Compact AV system, etc.)
When using your audio system speakers
You can control the volume output from your audio system using the TV's
remote control (see "Programming the Remote Control" on page 14), by
setting "Audio Out" in the _ (Audio) menu to "Variable."
If you want to adjust the volume through your audio system, set "Audio Out"
to "Fixed."
Notes
• The video signal is not output through
the AUDIO OUT jacks.
• When "Audio Out" in the _ (Audio) menu is set to "Variable," "Speaker" is to "Ofl;"
check if the speaker volume is moderate before switching "Speaker" from "OFF' to "On."
Otherwise, the speaker volume may get too loud.
26