SERVICE + MAINTENANCE
Service Mode MES
The Service Mode is activated by keeping pressed down the temperature button
and switching on the main button.
After this all 3 mode-LEDs (3) light up.
By pushing the temperature button (6), the different test-steps can be activated,
test steps 1-6 are indicated by the temperature LEDs (4)
1 = activates 120 V heating element (120V must be available)
2 = activates 120V relay (120V has not to be necessarily available)
3 = activates 12 V heating element (12V has to be available)
4 = activates burner control device – output (Gas operation)
5 = activates frame heating
6 = activates interior lights (For fridges without electrical lock)
58
TD S58