Tcas/Tas Traffic Overlay; Overlaying Traffic On Map Display; Overlaying Traffic On Terrain Display - Honeywell BENDIX/KING KMD 550 Pilot's Manual Addendum

Multi-function display, traffic avoidance function, tcas/tas/tis, for software version 01/13 or later
Hide thumbs Also See for BENDIX/KING KMD 550:
Table of Contents

Advertisement

TCAS/TAS TRAFFIC OVERLAY

OVERLAYING TRAFFIC ON MAP
DISPLAY
By pressing the OVLY Key a
display similar to Figure 5 will
be displayed. Pressing the
TRFC soft key will toggle
between overlay on or off as
shown in Figure 6. A repre-
sentation of the Traffic Page,
with a fixed range of 6 nm,
will be displayed in the upper
left of the Map display when
traffic data is overlaid.
Intruders will also be dis-
played on the map itself up to
the range setting selected on
MAP Setup Page.
Pressing SAVE & EXIT will
return to the map display.
The overlay status will
remain
as
saved
changed again by pressing
the OVLY Key.
OVERLAYING
TRAFFIC ON
TERRAIN DISPLAY
By pressing the OVLY Key a
display similar to Figure 7 will
be displayed.
Rev 3 Jun/2004
until
7
Figure 5
Figure 6
Figure 7
KMD 550/850 Traffic Addendum

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bendix/king kmd 850

Table of Contents