Download Print this page

Off-Scale" Traffic; "No-Bearing" Traffic; Ta/Ra While In Map Display - Honeywell BENDIX/KING KMD 550 Pilot's Manual Addendum

Multi-function display, traffic avoidance function, tcas/tas/tis, for software version 01/13 or later
Hide thumbs



TA or RA traffic that is beyond the selected range will be displayed as
half the appropriate symbol at the edge of the display matching the
bearing of the traffic.


If the bearing of TA or RA
traffic cannot be determined
by the traffic avoidance
system, no traffic symbol will
be displayed on the TRFC
display. The traffic informa-
tion will instead be displayed
in the upper right corner of
the display as shown in
Figure 3. A maximum of two
"no-bearing" TA and/or RA
intruders can be displayed.
If the intruder is not reporting
Figure 3
altitude, the altitude and trend
arrow fields will be blank.


If a Traffic Advisory presents
itself while in the Map
Display a yellow TRFC will
be displayed as shown in
Figure 4. In the case of a
Resolution Advisory in a
TCAS II system, the TRFC
will be displayed in red. If
AUTO-POP-UP is enabled, a
TA or RA will cause the
Traffic display to be pre-
sented automatically. The
default range of the pop-up
Figure 4
display will be 7 nm.
Rev 2 Nov/2002
KMD 550/850 Traffic Addendum



  Related Manuals for Honeywell BENDIX/KING KMD 550

This manual is also suitable for:

Bendix/king kmd 850