Performance Charts - Graco M 60 Instructions-Parts List Manual

Performance Charts

Fluid Outlet Pressure
Test Conditions:
Pump tested in water with inlet submerged.
100
(0.7, 7)
80
(0.55, 5.5)
60
(0.41, 4.1)
40
(0.28, 2.8)
20
(0.14, 1.4)
0
To find Fluid Outlet Pressure (psi/MPa/bar) at a specific fluid flow (gpm/lpm) and operating air pressure (psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Follow vertical line up to intersection with selected fluid outlet pressure curve.
3. Follow left to scale to read fluid outlet pressure.
A
B
C
0 2 4
(7.6) (15.2)
Fluid Pressure Curves
A at 100 psi (0.7 MPa, 7 bar) air pressure
B at 70 psi (0.48 MPa, 4.8 bar) air pressure
C at 40 psi (0.28 MPa, 2.8 bar) air pressure
6 8 10
(22.7) (30.3) (37.9)
FLUID FLOW – gpm (lpm)
12 14 16
(45.4) (53.0) (60.6)
819.6900 35