Connection To The Ad-8121 Printer - A&D GX Series Instruction Manual

Housing Shield

4-3 Connection to the AD-8121 Printer

Set the following parameters to use the AD-8121 printer.
Function setting
dout prt 0-3
dout ap-p 0-2
dout ap-b 0-2
dout pU5e 0, 1
5if bp5 2
5if btpr 0
5if Crlf 0
5if Ct5 0
When "MODE 1" or "MODE 2" of the AD-8121 printer is used
dout 5-td 0
dout 5-id 0
dout at-f 0
5if type 0
When "MODE 3" of the AD-8121 printer is used.
dout 5-td 0-3 Factory setting
dout 5-id 0, 1 Factory setting
dout at-f 0, 1 Factory setting
5if type 1
When data is transmitted continuously.
When all memory data is transmitted at one time.
When ID number, time and date are added to the weighing data or auto feed is performed.
dout pU5e 1
AD-8121 Printer
? Compact dot-matrix printer
? Statistical function, clock and calendar function, interval
print function, graphic print function, terminal mode
? 5 x 7 dots, 16 characters per line
Selects a print mode.
Selects the polarity for the auto print mode.
Selects the auto print difference.
Selects data output pause.
Factory setting 2400 bps
Factory setting 7 bits, Even parity check
Factory setting CR, LF
Factory setting CTS and RTS control, not used
Factory setting Does not output time and date. (Only for the GX
series)
Factory setting Does not output ID number.
Factory setting Does not perform auto feed.
Factory setting A&D standard format
Outputs time and date as necessary. (Only for
the GX series)
Outputs ID number as necessary.
Performs auto feed as necessary.
DP format
Uses pause.
Housing
Description
16
Shield