Version 1.1
Using the SMT351
The SMT351 will normally store up to 1 GB of data in memory. It's possible to change
this setting using the
Following are described the main features that user should keep in mind when using
SMT351:
SMT351 will start outputting data after half of the total amount of data to store
-
will have been provided to it.
SMT351 must store at the minimum 16 KB data must. The module is not able
-
to store less that 16KB data.
There must be a 1s delay after a reset command before any further
-
commands are sent to the SMT351.
Page 11 of 24
SMT351_Capture
function.
SMT351 User Manual