Nepagene ELEPO21 Instruction Manual page 4

Warning

Location of warning labels
Caution

Power source, grounding and wiring cautions
Warning
1) Do not open the cover of the product when the power is ON.
2) Do not touch the un-insulated parts of cables and electrodes when power
is on.
3) Do not operate this product in any of the following scenarios:
 There is physical damage to the product.
 Smoke, strange noise or fumes come from the product.
Contact your supplier immediately.
The warning labels must always be legible. Ensure that the warning labels
are properly placed and legible. If a warning label is illegible or is peeling off,
contact us to replace it.
1) To avoid the risk of fire, or electrical shock, observe all ratings and
markings on the product. Consult this manual for further ratings
information before making connections to the product.
2) This product is grounded through the grounding conductor of the power
cord. To avoid electric shock, the grounding conductor must be connected
to an earth grounding.
3) Use only the following power supply cord. Using the wrong power cord
could result in danger or fire.
・For AC100-120V area
UL Listed, detachable power cord set, 3 conductor grounding Type
SVT, No. 18 AWG, 3 m long maximum, rated at AC125V minimum.
・For AC220-240V area
Approved according to EU/EN standards, 3 conductor grounding
Type H05VV-F, 3 m long maximum, rated at AC250V minimum.
4) Do not bend the power cord forcibly or place heavy object on the cord
because it might damage the cord and cause fire or electric shock.
Safety Precautions
iii