Danger
5.6
Displaying Output Electric Pulse Parameters
Default display
After delivering an electroporation program, the measured voltage and current of the first pulse and the
total energy of the pulses will be displayed in the Measurements frame in the Poring Pulse window and
the Transfer Pulse window.
In order to display the detailed parameters please follow to following procedures:
Displaying measured parameters of Poring Pulse
1
After completing the program, press the Meas. Button.
2
The values in the Measurements frame in the Poring Pulse window will blink. The blinking values show
the measured parameters of the first output Poring Pulse. At the same time, "1" indicating the first pulse
will be displayed on the Number of Pulses option within the Set Parameter frame in the Poring Pulse
window.
3
Press ▸ button to display the second Poring Pulse. The blinking values show the measured parameters
of the second output Poring Pulse. At the same time, "2" indicating the second pulse will be displayed on
the Number of Pulses option within the Set Parameter frame in the Poring Pulse window.
Do not touch the exposed connections and components of electrodes and
cables when power is on and electric pulses are being delivered.
5 Operating Instructions
5-9