Nepagene ELEPO21 Instruction Manual page 14

2. Transfer Pulse window
B
A
Set Parameters frame
A. Voltage [V]
B. Pulse Length [msec]
C. Pulse Interval [msec]
D. Number of Pulses
E. Polarity [+ / +/-]
Measurements window
F. Voltage [V]
G. Current [A]
H. Energy [J]
3. Selection window
A
A. Poring Pulse frame
B. Transfer Pulse frame
C. Others frame
4. Impedance window
A
A. Impedance [kΩ]
C
D
Display the set pulse voltage value.
Display the set pulse length in milliseconds.
Display the pulse interval (duration between pulses) in milliseconds.
Display the number of set pulses.
Display the set electrical polarity (+ only or +, followed by -).
Display the measured output voltage value.
Display the measured output current value.
Display the calculated output pulse energy in joules.
B
Illuminate the editable parameter.
Illuminate the editable parameter.
Illuminate the editable item.
- Display the electrical impedance value between the electrodes by
pressing Ω button.
- Display the program number as "Ch.XX" when Memory in Others frame
in Selection window is selected and lighting up.
E G
F
C
3 Part Names
H
3-3