Table of Contents
Advertisement
5 Operating Instructions
4
Press ▸ button to display the next output Poring Pulse. This process can be repeated until the last
pulse is displayed. The previous pulse can be displayed by pressing ◀ button.
5
The total energy of the output Poring Pulses will be displayed by pressing ▸ button after displaying the
last pulse. At the same time, "t" indicating total will be displayed on the Number of Pulses option within
the Set Parameter frame in the Poring Pulse window.
6
The averages of voltage, current and energy of the Poring Pulse will be displayed by pressing ▸ button
after displaying the total energy. At the same time, "A" indicating average will be displayed on the
Number of Pulses option within the Set Parameter frame in the Poring Pulse window.
Displaying measured parameters of Transfer Pulse
7
After applying an electroporation program, press the Meas. button, and then press ▾ button.
5-10
Hide quick links:
Advertisement
Table of Contents
