Tadiran Telecom Swift Inverter 9U Service Manual page 75

Left and right
Remove left and right terminal
terminal
board
board
Press screw cover firmly on the
middle frame , the
Screw cover
becomes
remove the two screw caps .
Loosen the clasps of the
medium
medium frame, remove the
frame
medium frame.
1) Take all the connector of
PCB upper side out.(Including
Power cord)
Electrical
2) Detach the outdoor unit
Parts
connection
(Main PCB)
terminal block.
3) If pulling the main PCB up,
it will be taken out.
Remove axial sleeve of louver
air vent, link, bend the air vent outwards
louver link and then remove the air vent
and louver link.
Pipeline
Remove the Pipeline clamp.
clamp
mark
unlocked, then
wire from the
74