Tadiran Telecom Swift Inverter 9U Service Manual page 17

Note : remote controller outside buttons only valid when surface cover is closed.
①"ON/OFF"button
* Press this button,the unit will be started or stopped, which can clear the timer or
sleeping function of last time.
②"SPEED"button
* Press this button, speed will change as below:
③" "or " "button
*When press " "button, the setting temperature will be increased by 0.5℃. When
press " "button, the setting temperature will be decreased by 0.5℃
* The temperature will be changed quickly by pressing
the button continuously and setting
temperature range is 16℃to 32℃.
④"COOL"button
* Press the COOL button, the mode of operation is shifted into cooling.
⑤"HEAT"button
* Press the HEAT button, the mode of operation is shifted into heating.
* Note: cooling only unit has no heating function.
⑥"SWING"button（SWING ）
and SWING
* Press this button to open up/down(left/right) swing function, press it again, fix
louver position.
* Up/down(left/right) setting is only valid in this mode, it will not affect louver
position in other modes.
* Up/down(left/right) swing has memory function, it can keep primary setting when
turn off then turn on or switch from other modes to primary mode.
15