Port Allocation Table Window
Ports Columns (4)
The Ports column is used to assign ports in either groups of eight (8) or 16 ports, depending on what is selected in the
Allocated column.
Up to four (4) groups of 16 ports are allowed.
TIP:
To assist in setup and configuration debug, assign consecutive port numbers for multi-group port columns.
NOTE:
The Ports column only becomes active for the number of ports you are allocating. For example, if you have 32
ports, only the first two (2) Ports columns are enabled.
Ports Column Options
FIGURE 34.
Warning Column
The Warning column displays a warning when configured card types do not match detected card types and when not all ports
are allocated (for a given card, or for the intercom as a whole).
42