Table of Contents
Advertisement
Introduction
The Port Allocation Table is used to support I/O cards with more than 16 ports. It allows you to select which card types
occupy which intercom slots and which ports are allocated to each card. Ports can be allocated in groups of four (4). Each
group contains 16 ports. Each MADI card can have no more than 64 ports per card.
NOTE:
If you are running a single frame system, the single frame can hold up to 880 ports; if you are running a multi-
frame Tribus system, you are limited to 256 ports per frame.
IMPORTANT:
Check power limitations of each frame before building large intercom systems.
Requirements:
The Port Allocation Table requires the following minimum firmware versions:
AZedit V3.9.0
•
MCII-e V2.3.0
•
DBX V1.24.0, w/PCII-e V1.24.0
•
To navigate to the port allocation table in AZedit, do the following:
From the Options menu, select Port Allocation Table.
>
The Port Allocation Table window appears.
Port Allocation Table
APPENDIX A
39
Advertisement
Table of Contents
