Channel Mapping - Bosch MADI Card Plus Series User Manual

Configuration

Channel Mapping

Channel Mapping allows you to assign specific MADI channels to particular ports. For example, if your MADI device has 56
channels of audio and each ADAM slot supports 16 channels, you may need to assign channels on the same MADI device to
different ports.
To map an individual MADI 16 Plus Channel, do the following:
From the System menu in AZedit, select Miscellaneous | MADI Configuration.
1.
The MADI Configuration window appears.
Click the MADI Channel Mapping tab.
2.
The MADI Channel Mapping page appears.
Channel Mapping Page
FIGURE 21.
From the Card Slot drop down menu, select the MADI 16 Plus card you want to assign a MADI device channel.
3.
NOTE: If you are using multiple types of cards (i.e., RVON-16, AIO-16, etc.) in your frame, select the Show MADI
cards only check box to only show MADI cards. This makes it easier for you to select the card you want to
assign channels to.
From the MADI Channel column, select the MADI device channel you want to assign to the MADI 16 Card.
4.
31