Page 1
O P E R A T I N G I N S T R U C T I O N S PSS Prime Pattern sensor Print Detector...
Page 2
Original document This document is an original document of SICK AG. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
6.10 Other indicators and functions..............Troubleshooting................. 27 Possible errors during commissioning............ 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Page 4
12.1 EU declaration of conformity and certificates........12.2 Certification according to UL 60947-5-2..........O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
… indicates a situation of imminent danger, which will lead to a fatality or serious injuries if not prevented. 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Before calling, make a note of all type label data such as type code, serial number, etc., to ensure faster processing. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
Knowledge of the software and hardware environment in the ■ application O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
0.8 x 8 mm Teach-in print without MBB124115AZZZZBZZZZP background ZZZZZ1 O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
• Degree of blackening • Only partially printed 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Ensure that any device movement does not affect the sensing distance. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
If these instructions are not complied with, the IP enclosure rating for the device is not guaranteed! 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
To ensure protection against short-circuits/overload in the customer’s supply cables, the wire cross-sections used must be appropriately selected and protected. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
The set parameters are reset to the factory settings. 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
The section that is now read is taught in as a reference pattern. Move the sensor over the print. 12345 12345 12345 O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
Page 19
Sending the “Trigger window start” (ISDU 2 – Value 226) system command to ■ the sensor. 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Page 20
12345 12345 12345 12345 12345 12345 O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
Page 21
“ET” input line, the signal should now be reset to LOW. 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
70 - 90 fine: Print is present, the quality is good, but details are missing. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
Quality of Print* 12345 12345 12345 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
The external teach-in and the trigger input can be synchronized for the teach-in process as follows: Trigger O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
In run mode, the device displays the quality compared to the reference print in %. The higher the value, the better the correspondence with the taught-in print. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
If the light emission window is scratched or damaged (cracked or broken), the device must be replaced. Contact SICK Service to arrange this. O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK...
Page 29
8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
■ Description of the fault that occurred ■ O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
M12 male connector (can be rotated by 180°) Control panel 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Accessories can be found on the online product page at: www.sick.com/PSS O P E R A T I N G I N S T R U C T I O N S | PSS Prime 8022051/2018-01-31 | SICK Subject to change without notice...
The certification is only valid with corresponding device identification on the type label of the respective device. 8022051/2018-01-31 | SICK O P E R A T I N G I N S T R U C T I O N S | PSS Prime Subject to change without notice...
Page 34
Phone +36 1 371 2680 Phone +386 591 788 49 E-Mail office@sick.hu E-Mail office@sick.si India South Africa Phone +91 22 6119 8900 Phone +27 11 472 3733 Further locations at www.sick.com E-Mail info@sick-india.com E-Mail info@sickautomation.co.za SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the PSS Prime and is the answer not in the manual?
Questions and answers