Page 1
O P E R A T I N G I N S T R U C T I O N S KTS/KTX Prime Contrast sensor Analog input voltage and analog output voltage...
Page 2
This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modi‐...
Possible errors during commissioning............ Possible errors during operation............. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 4
12.2 Certification according to UL 60947-5-2..........12.3 Licenses....................O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
… indicates a situation of imminent danger, which will lead to a fatality or serious injuries if not prevented. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Before calling, make a note of all type label data such as type code, serial number, etc., to ensure faster processing. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
The system designer must provide measures to ensure the safety of persons and systems in accordance with the legal guidelines. SICK AG assumes no liability for losses or damage arising from the use of the product, either directly or indirectly. This applies in particular to use of the product that does not conform to its intended purpose and is not described in this documentation.
IEC 62471:2006. No special measures are required (e.g., eye protection). O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
The product is a replacement device. The device is not intended to be repaired. Interfer‐ ence with or modifications to the device on the part of the customer will invalidate any warranty claims against SICK AG. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
2 = sensing distance 25 mm Filtering 4 = no filter O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
B = special device with automation function C = reserved Z = standard Product features and functions 3.2.1 Device view Figure 2: KTS Prime light emission long housing side Connection Mounting slot Display and control panel Fixing hole Light emission 8020706.1E9P/2022-04-26 | SICK...
Page 12
M5 mounting thread Display and control panel M5 mounting thread Light emission Figure 5: KTS Prime long sensing range light emission long housing side Connection Mounting slot Display and control panel O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK...
Page 13
8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 14
• Color control in yarn or line production O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
• Shock and vibration-free mounting. Mounting the device Figure 8: KTS Prime Figure 9: KTX Prime light emission short housing side 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 16
To secure a stable detection when having high gloss material a tilt angle of 10°-15° might be necessary. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
If these instructions are not complied with, the IP enclosure rating for the device is not guaranteed! 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
NPN switching behavior. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 20
+ (L+) (≤ 100 mA) ‒ (M) ‒ (M) O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 21
+ (L+) (≤ 100 mA) ‒ (M) ‒ (M) 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
To leave the current menu level, press and hold the minus pushbutton for > 3 seconds. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
To leave the current menu level, press and hold the minus pushbutton for > 3 seconds. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Dark Delay Display switch Dynamic teach-in Error Fine/coarse O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Resetting the device (factory setting) Press and hold the plus and minus pushbuttons for 10 s. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Use the plus or minus pushbutton to select Pro and press the SET pushbutton. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 27
Setting the switch-on and switch-off delay (shift) Use the plus or minus pushbutton to select tSh. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 28
Use the plus or minus pushbutton to select the required setting. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 29
Sensing distance set too close or too far away Sensing distance set to moderate 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 30
Use the plus or minus pushbutton to select dSP. Press the SET pushbutton. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
The settings made, but not confirmed, are not adopted. To quit standby mode, one of the operating keys must be pushed. 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Light emission (optics) is • Check parameter settings dirty O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Only use cleaning agents suitable for the lens material. NOTE Static charge may cause dust particles to stick to the light emission window. This effect can be avoided by using an anti-static glass cleaner in combination with the SICK lens cloth (can be obtained from www.sick.com). NOTE If the light emission window is scratched or damaged (cracked or broken), the device must be replaced.
Page 34
O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
This symbol on the product, its package or in this document, indicates that a product is subject to these regulations. Returning devices Do not dispatch devices to the SICK Service department without consultation. NOTE To enable efficient processing and allow us to determine the cause quickly, please...
Operation in short-circuit protected network max. 8 A O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Dimensional drawings KTS Prime 47.5 (1.87) 43.3 (1.7) (1.02) (1.26) (0.22) (0.35) Figure 11: KTS Prime Optical axis Fixing hole Connector M12, as-delivery state Connector M12, mechanical stop rechts Connector M12, mechanical stop left Control panel KTX Prime (2.09) (1.18) (1.57)
Page 38
Connector M12, mechanical stop rechts Connector M12, mechanical stop left Control panel O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Accessories can be found on the online product page at: www.sick.com/KTS_Prime www.sick.com/KTX_Prime 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
The certification is only valid with corresponding device identification on the type label of the respective device. 12.3 Licenses O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020706.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 41
ANNEX 8020706.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 42
E-Mail office@sick.com.gr E-Mail info@sick.ru Vietnam Hong Kong Singapore Phone +65 6744 3732 Phone +852 2153 6300 Phone +65 6744 3732 E-Mail sales.gsg@sick.com E-Mail ghk@sick.com.hk E-Mail sales.gsg@sick.com Detailed addresses and further locations at www.sick.com SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the KTS Prime and is the answer not in the manual?
Questions and answers