Power Connection
Ethernet Connection
Click [Settings] > [Network Settings] > [TCP/IP Settings] > [DHCP], input the IP address
and click [OK].
Note: In LAN, IP addresses of the server (PC) and the device must be in the
same network segment when connecting to ZKBioAccess software.
Recommended power supply
1) 12V ± 10%, at least
2) To share the power with other devices, use a power supply
with higher current ratings.
Default IP address: 192.168.1.201
Subnet mask: 255.255.255.0
30
00mA.
1
2
3
4
RJ 45
5
6
7
8
5
GND
12V DC
ZKBioAccess
IP address: 192.168.1.130
Subnet mask: 255.255.255.0