Control By Telnet - Sony SIR-3400H Instruction Manual

17. Control by Telnet

The ETHER (RJ45) connector on the rear panel of the unit uses a signal format compliant with TCP/IP. This
enables control from a host computer by connecting a LAN cable (sold separately).
c
Use a cross cable if the LAN cable is connected directly to another computer.
When controlling a recording unit using Telnet, use the ERR? and ALM? commands to monitor the recording
unit status.
TCP/IP (Telnet) connection
HOST IP address : 192.168.1.100 (default setting)
Port no.
Login : xxxx
Password : sms
After entering this information, the commands can be executed.
Type "quit" to disconnect from Telnet.
SIR-3400H / SIR-3032i / SIR-3032W
: 23
17-1
(E)