Sony SIR-3400H Instruction Manual page 23

LCD Screen
Checking of the recording and playback statuses, basic settings, operation settings, and other operations are
performed at the LCD screen.
For details about the settings, see the setting description chapter. This section explains the recording/playback
screen (Measurement).
qd Title display area
This area displays the title of the currently displayed screen.
For details, see "6-2. LCD Screen Configuration."
qf Status display area
This area uses icons to indicate the input status of subchannel data or essential notification information
such as errors or warnings.
Mark Description
When a power supply error occurs
When a condensation error occurs
When a recording/playback error occurs
When multiple measuring units are operating in synchronizing mode
When signals are input to the AUX1 (DIGITAL) IN connector or when the recorded
signals are played back
When signals are input to the AUX2 (IRIG-B) IN connector or when the recorded
signals are played back
When IRIG-B time code signals that are input from an external time code generator
are detected correctly or when the recorded signals are played back
When the playback signal source of the speakers or earphones are set to voice
annotation
When the playback signal source of the speakers or earphones are set to analog
data signals
SIR-3400H / SIR-3032i / SIR-3032W
qd qg qh qj
qf
qk
ql
w;
wa
ws
wd
wf
3. Names and Functions of Parts
3-3
(E)