Command; Status A; Sth; Synchronous Playback Status - Sony SIR-3400H Instruction Manual

Status Commands
When a status request is received from a host computer, the recording unit sends back the following setting
value or status contents:

Command

Function
ADR? Recording media ADDRESS
ALM? Alarm status
AUX? Front panel status
BAR? Bar meter setting readout
CAC? Calibration Protect Status
CAL? Calibration status
CHA? Channel mode setting readout
CFG? Unit configuration
CMD? Command check
ERR? Error check
FMT? Recording media formatting execution status
FTP? Frequency type readout
IDS? Recording media ID number readout
INP? Input format setting readout
LVA? Signal level readout (text format)
LVB? Signal level readout (binary format)
MEM? Recording memo readout
MOD? Transport mode readout
MON? Monitor channel setting readout
OFS? Input DC offset value readout
OPL? Output level setting readout
PNL? Panel lock status readout
RNG? Input range setting value readout
RPT? Auto repeat status readout
SCH? Search status
SLF? Diagnostics status
SPD? Recording media speed readout
STA?

Status A

STH?

Hard disk status
SYN?

Synchronous playback status

TIM? Real-time clock readout
TOC? TOC data readout
TRG? Trigger setting status
TRM? Terminator selection status (returned strings)
TSG? Test signal selection status
UTL? Utility mode setting readout
VOL? Recording media volume readout
SIR-3400H / SIR-3032i / SIR-3032W
Comments
17. Control by Telnet
17-3
(E)