Table of Contents
Advertisement
3. Names and Functions of Parts
Setting Keys
The setting keys can be used to perform the following two operations.
. Function and operation settings
. Input of numbers and text (for recording notes only)
Key operation is described primary as function/operation keys.
Also, in this manual, the key names (such as INDEX/ID key) are used as function/operation setting keys
except in the description of note recording.
wk
wl
ea
The enabled keys are changed in transport mode. (Yes: Enabled, No: Disabled)
Transport
Setting keys
mode
INDEX/ID SPD/BCM SPEAKER
STOP
No
E-E
No
REC-PAUSE No
REC
Yes
FWD
No
FF
No
REW
No
SEARCH
No
<Lamps>
The lamp above the key indicates the status below.
Blinking : The key is enabled.
Lit
: The key was pressed, and the setting can be made.
When there are two lamps, the key has the following two functions. (See "Setting Key Descriptions".)
Left-side lamp
: When the key is pressed by itself
Right-side lamp : When the setting key is pressed after pressing the SHIFT key (except for the SHIFT key
right lamp)
<Setting Key Descriptions>
The functions of some setting keys change depending on if the key was pressed by itself or if the setting key
was pressed after pressing the SHIFT key.
The descriptions in this section use the expressions below to indicate how the key was pressed.
When the key is pressed by itself
When the setting key is pressed after the SHIFT key : in SHIFT mode
3-6
(E)
wg
wh
ef
es
RANGE OFFSET INPUT SEARCH MEMO OUT/TSG MRK1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
No
No
Yes
No
No
Yes
No
No
No
No
wj
e;
ej
eg
eh ed
ek
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
: No additional comment
MRK2
Yes
Yes/No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes/No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
SIR-3400H / SIR-3032i / SIR-3032W
SHIFT
Yes
Yes
Yes
Yes
No
No
No
No
Advertisement
Chapters
Table of Contents
