Compatibility - ABB NCSA-01 CS 31 Quick Installation And Start-Up Manual

Chapter 2 – Overview
CS 31 Master
Slave Stations
I/O
Unit
ABB Drive

Compatibility

2-2
configuration. See the user documentation of the drive for module
placement options.
PE +24V
X2
ABB Drive
The NCSA-01 is compatible with the following ABB drives:
• ACS 300 (SW vsn CDD02E.9/CDE02E.9 or later)
• ACS 400
• ACS 600 SingleDrive (SW vsn 2.8 or later)
• ACS 600 MultiDrive
• ACS 600 MotionControl (ACP 600) (SW vsn 1.1 or later)
• ACS 600 CraneDrive (ACC 600)
• ACS 600 Pump and Fan Drive (ACF 600)
(SW vsn AF0A1020 or later)
• ACS 1000
• DCS 500 (SW vsn 21.226 or later).
The NCSA-01 is compatible with the following CS 31 master stations:
• Central Processing Units: 07 KR 31, 07 KT 31, 07 KR 91, 07 KT 92,
07 KT 93, AC30
• PLC Couplers: 07 CS 61 and 07 CS 91 for ABB Procontic T200 and
T300
• 07 CM 90 PC Board.
0V SH SHF DG D(N) D(P)
RXD
NCSA-01
TXD
CS 31
ADAPTER
DDCS
BUS
TERMINATION
UART
ON
OFF
ERROR
Screw terminal block for the CS 31 bus
cable connection and for the external
power supply connection
Fibre optic connectors for the ACS 600
connection:
RXD = Receiver
TXD = Transmitter
Switch for CS 31 bus termination
Status LEDs
(For descriptions see Chapter 7)
NCSA-01 Installation and Start-up Guide