Table of Contents
Advertisement
Contents
Intended Audience
What This Guide
Contains
NCSA-01 Installation and Start-up Guide
This chapter contains a description of the NCSA-01 CS 31 Adapter
Module Installation and Start-up Guide.
The Guide is intended for the people who are responsible for installing,
commissioning, and using the NCSA-01 CS 31 Adapter Module with an
ABB drive. The reader is expected to have a basic knowledge of
electrical fundamentals, electrical wiring practices, the drive, and the
use of the drive control panel.
The installation and start-up of the NCSA-01 CS 31 Adapter Module
are introduced in this Guide.
It is assumed that the drive is installed and ready to operate before
starting the installation of the adapter module. For more information on
the installation and start-up procedures of the drive, please refer to its
user documentation.
Safety Instructions are featured in the first few pages of this Guide.
Safety Instructions describe the formats for various warnings and
notations used within this Guide. This chapter also states the safety
instructions which apply to the installation and operation of the
NCSA-01 Module.
Chapter 2 – Overview contains a short description of the CS 31
system and the NCSA-01 Adapter Module, a delivery checklist, and
information on the manufacturer's warranty.
Chapter 3 – Mechanical Installation contains the instructions for
placing and mounting the module.
Chapter 4 – Electrical Installation contains the wiring instructions.
Chapter 5 – Programming explains how to program the master
station and the drive before the communication through the adapter
module can be started.
Chapter 6 – Communication contains a description of how data is
transmitted through the NCSA-01.
Appendix A contains technical data.
Appendix B contains a specification of the ambient conditions allowed
during transportation, storage and use of the NCSA-01.
Chapter 1 – Introduction
1-1
Advertisement
Table of Contents
