Advertisement
Instructions
To mount the cable to the terminal:
1. Strip isolation of 9-10 mm
2. Insert a screw driver in the square hole.
3. Insert the cable in the adjacent circular hole.
4. Remove the screw driver. The cable is now
mounted to the terminal.
6 | AN000086420674en-000201
To remove the cable from the terminal:
1. Insert a screw driver in the square hole.
2. Pull out the cable.
• Basic Wiring Example
1. Mount terminals from the accessory bag to
the front of the CD 302.
2. Connect terminals 18, 27 and 37 to +24 V (ter-
minal 12/13)
Default settings:
18 = start
27 = coast inverse
37 = safe stop inverse
© Danfoss | DCS (CC) | 2019.04
Advertisement
