Siemens SIRIUS 3RW52 Manual page 108

Functions
7.8 Standard 3RW5 HMI
Measured values
Parameter display
108
Display Explanation
LOCL Manual mode
CNTRL
REMT Automatic mode Automatic mode means that the 3RW5 HMI Standard is not
CNTRL
Display Explanation
...A The average of the 3 phase currents is displayed in amps.
I AVG
...A Current measured value phase L1 is displayed in amps.
I L1
...A Current measured value phase L2 is displayed in amps.
I L2
...A Current measured value phase L3 is displayed in amps.
I L3
Display Explanation
.. Current limiting value as a multiple of the set rated operational current I
xIe motor.
...% Starting voltage
U ON
...s Ramp-up time
t ON
...s Ramp-down time
t OFF
... Trip class for motor overload protection
CLASS
...A Rated operational current I
Ie
.... AUTO
RMode
MAN
REMT
... Station address for PROFIBUS (only displayed if a "PROFIBUS" communication
module is being used)
PBADR
... Station address for Modbus (only displayed if a "Modbus RTU" communication
module is being used)
MODBS
CNTRL (CONTROL)
Manual mode means that the 3RW5 HMI Standard is the
master control.
the master control. To make the unit the master control,
press the LOCAL / REMOTE key.
of the motor
e
Auto RESET
Manual RESET
Remote RESET
Manual, 01/2019, A5E35630451002A/RS-AD/004
of the
e
SIRIUS 3RW52 Soft Starter