Glossary - Siemens SIRIUS 3RW52 Manual

Glossary

Auto RESET
"Auto RESET" means that faults are automatically reset as soon as the cause is eliminated.
Ground fault
Fault whereby an external conductor comes into contact with ground or the grounded neutral
point.
GSD
Device master file
This file is required to be able to configure a device as a DP standard slave in the HW Config
of a Siemens or external system.
GSDML
Device master file
This file is required to be able to configure a device as a DN device in the HW Config of a
Siemens or external system.
HSP
Hardware support package
The hardware support packages allow you to configure modules that are not listed in the
hardware catalog of your TIA Portal installation.
Manual RESET
"Manual RESET" means that the following options are available for acknowledging faults:
● RESET / TEST key on 3RW52 soft starter
● RESET / TEST key on 3RW5 HMI Standard
● Reset via bus interface
● Reset via F key on 3RW5 HMI High Feature
● Reset via 3RW5 HMI High Feature
PII/PIQ
Process image input/process image output
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
193