Searching For Frames With Essence Marks - Sony PDW-F70 Operating Instructions Manual

Note
The maximum number of blocks may be larger than 1728
when the recorded duration of the clip is short. In this case,
the frame interval of expanded thumbnails is fixed at 1
frame. This allows you to view expanded thumbnails at
equal intervals.
To execute the expand function
1
With the thumbnail list displayed, select the clip that
contains the scene that you want to find.
2
Press the EXPAND (F5) button.
The selected clip is divided into 12 blocks, and the first
frame of each block appears in the thumbnail list.
3
As required, repeat step 2 once or twice.
Note
Thumbnails cannot be further divided once their
duration reaches 1 frame.
To return to the thumbnail list screen of the
previous level
Hold down the SHIFT button and press the EXPAND
button.
To return to the thumbnail list screen
Press the RESET button.
4
When you find the thumbnail of the target scene, press
the SET button or the PLAY button.
If you press the SET button, a still image appears
showing the selected frame.
If you press the PLAY button, playback starts from the
selected frame.
Searching for Frames With Essence
Marks
Proceed as follows.
ACCESS
NETWORK
LOCAL
REMOTE
LEVEL
PHONES
1
With the SUB CLIP button off, press the ESSENCE
MARK (SHIFT + THUMBNAIL) button, turning it
on.
The essence mark selection screen appears.
Number of block
Essence marks not recorded on the disc are displayed
in gray.
To return to the thumbnail list screen
Press the RESET button.
2
Press the PREV or NEXT button, or press the M/
MARK1 button or m/MARK2 button, to select the
desired essence mark.
3
Press the SET button.
A list appears showing the frames which contain the
selected essence mark.
1 3
F1
F2
F3
MENU
F4 CHAPTER
SUB THUMB
F5 EXPAND
SET RESET
CLIP NAIL
PAGE DISPLAY
CLIP ESSENCE
MENU MARK
PREV PLAY NEXT
CH 1 CH 2 CH 3 CH 4 KEY INHI
VARIABLE
REC
PRESET
PB
SHIFT
TOP F REV F FWD END
2
EJECT
VAR
MARK1
IN OUT
JOG
MARK2
STOP REC
SHUTTLE
STANDBY
2
51
Playback