Table of Contents
Advertisement
Alarm message in time
data display section
a)
HD 60I/30P
a)
HD 50I/25P
a)
HD 23P Disc
a)
ILL. REF!
a)
ILL. REC!
a)
ILL. PLAY!
a)
MEM. Full!
a)
MEM. Empty!
Recording
a) Displayed only when DISPLAY CONTROL >ALARM is set to "ON" or
"LIMITED".
Alarm message in monitor video
section
DISC CANNOT BE RECORDED. HD 60I
or HD 30P CLIP(S) EXIST.
DISC CANNOT BE RECORDED. HD 50I
or HD 25P CLIP(S) EXIST.
DISC CANNOT BE RECORDED. HD
23.98P CLIP(S) EXIST.
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO
SIGNAL.
USE COMMON REFERENCE SIGNAL
OR CONNECT RECORDER REF OUT TO
PLAYER REF IN.
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
ILLEGAL PLAYBACK.
MEMORY FULL !!
MEMORY EMPTY !!
NOW RECORDING ...
Description/action
This appears when the system frequency of this unit
does not match that of the loaded disc.
Insert a disc that matches the system frequency, or
change this unit's system frequency setting (see page
23).
Input a reference signal synchronized with this unit's
system frequency.
Check the signals being input to this unit.
Check the disc being played by this unit.
Check the disc being recorded by this unit.
Wait for recording to finish.
111
Troubleshooting
Hide quick links:
Advertisement
Table of Contents
