Sony PDW-F70 Operating Instructions Manual page 92

VIDEO CONTROL [Video]: Settings related to video
control
PROCESS CONTROL
[> Proc ctrl]: Separate
adjustment screens
appear for the following
items. Use the jog dial to
make settings, and press
the MENU button to return
from the adjustment
screens to the second
level of the setup menu.
UP CONVERT [> UP
convert]: Specify
upconvert output.
DOWN CONVERTER [>
Down conv]: Set up the
down converter.
92
System Menu
VIDEO GAIN [>> V gain]:
Adjust the video output
level.
CHROMA GAIN [>> C gain]:
Adjust the chroma output
level
CHROMA PHASE [>> C
phase]: Adjust the
chroma phase.
SETUP LEVEL [>> Setup
lev]: Adjust setup level.
HD SYNC PHAS [>> HD S
PHAS]: Adjust HD sync
phase.
SD SYNC PHAS [>> SD S
PHAS]: Adjust SD sync
phase.
OUTPUT SCH [>>
OutputSCH]: Adjust the
subcarrier H phase of
composite video output.
AUTO SQEEZE [>> Auto
SQZ]: Select whether to
use auto squeeze mode.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
DETAIL GAIN [>> Detail]:
Select the gain level of
the up converter image
enhancer.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
Note
"SQEEZE" (squeeze mode) is
selected automatically during
recording.
DETAIL GAIN [>> Detail]:
Select the gain level of
the down converter
image enhancer.
CROSS COLOR [>> Cross
col]: Turn cross color
adjustment on or off.
Description
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–128 [>>> –128] to 127 [>>> 127]
Factory default setting: *0 [>>> 0]
–272 [>>> –272] to 271 [>>> 271]
Factory default setting: *0 [>>> 0]
–2200 [>>> –2200] to 2199 [>>> 2199] (system frequency:
60i)
–2640 [>>> –2640] to 2639 [>>> 2639] (system frequency:
50i)
–2750 [>>> –2750] to 2749 [>>> 2749] (system frequency:
23.98P)
Factory default setting: *0 [>>> 0]
–1716 [>>> –1716] to 1715 [>>> 1715] (system frequency:
60i/23.98P)
–1728 [>>> -1728] to 1727 [>>> 1727] (system frequency: 50i)
Factory default setting: *0 [>>> 0]
–512 [>>> –512] to 511 [>>> 511]
Factory default setting: *0 [>>> 0]
Note
Valid for serial number 11001 or higher and firmware version
1.5 or higher.
*OFF [>>> OFF]: Do not use.
ON [>>> ON]: Use.
*EDGE CROP [>>> Edge Crop]: Edge crop mode
LETER BOX [>>> LetterBox]: Letter box mode
SQEEZE [>>> Squeeze]: Squeeze mode
*LOW [>>> Low]: Low
MID [>>> Mid]: Mid
HIGH [>>> High]: High
*EDGE CROP [>> Edge Crop]: Edge crop mode
LETER BOX [>> LetterBox]: Letter box mode
SQEEZE [>> Squeeze]: Squeeze mode
*LOW [>> Low]: Low
MID [>> Mid]: Mid
HIGH [>> High]: High
*OFF [>>> OFF]: The image enhancer uses default settings
for cross color.
ON [>>> ON]: The image enhancer adjusts so that there are
fewer cross colors.