External Synchronization - Sony PDW-F70 Operating Instructions Manual

XLR cable
120 to 150 mm
When the diameter of the XLR cable is too large
to loop
If the diameter of the XLR cable is so large that is difficult
to loop the cable through the ferrite core, simply pass it
through the core without looping. In this case, use a
binding strap (not supplied) to at the specified position, as
shown in the figure below.
XLR cable
Binding strap
(not supplied)
Note
This unit will not meet the requirements of the CISPR 22
Class B electromagnetic interference standard if ferrite
cores are not attached to XLR cables.
30

External Synchronization

Ferrite core (supplied)
120 to 150 mm
Ferrite core
(supplied)
External Synchronization
This unit synchronizes as shown in the following table,
according to the presence or absence of signals input to the
HDSDI INPUT connector, the presence or absence of
signals input to the REF VIDEO INPUT connector, and
the setting of the V INPUT item on the HOME page of the
function menu (see page 81).
Signal Signal
input to input to
HDSDI REF VIDEO
INPUT INPUT
connector connector
Yes Yes
Yes No
No Yes
No No
Note
There is no external synchronization for file operations by
FAM connection (see page 78).
V INPUT External
setting synchronization
HDSDI Synchronize to
HDSDI input
SG Synchronize to REF
VIDEO input
HDSDI Synchronize to
HDSDI input
SG No external
synchronization
HDSDI Synchronize to REF
VIDEO input
SG
HDSDI No external
synchronization
SG