Appendix; General Operating Conditions - Beckhoff BK3 0 Series Documentation

Appendix

8 Appendix
8.1

General operating conditions

The following conditions must be met in order to ensure flawless operation of the fieldbus components.
Environmental conditions
Operation
The components may not be used without additional protection in the following locations:
• in difficult environments, such as where there are corrosive vapors or gases, or high dust levels
• in the presence of high levels of ionizing radiation
Condition
Permissible ambient temperature during operation see technical data
Installation position
Vibration resistance
Shock resistance
EMC resistance
Emission
Transport and storage
Condition
Permissible ambient temperature during storage
Relative humidity
Free fall
Protection classes and types
Condition
Protection class in accordance with IEC 536 (VDE
0106, Part 1)
Protection class conforms to IEC 529
Protection against foreign objects
Protection against water
Component identification
Every supplied component includes an adhesive label providing information about the product's approvals.
For example, on the BK2000:
84
Permissible range
variable
According to EN 60068-2-6
According to EN 60068-2-27
According to EN 61000-6-2
According to EN 61000-6-4
Permissible range
-25 °C... +85 °C
95 %, no condensation
up to 1 m in the original packaging
Permissible range
A protective conductor connection to the mounting rail is
necessary!
IP20 (protection against contact with a standard test
finger)
Less than 12 mm in diameter
no protection
Version: 4.3.0 BK3xx0