Auriol AFW 2 A1 Operating Instructions Manual page 17

Once the power supply has been established, the display will
light up and go through a brief check of the display elements .
The weather station will now attempt to connect to the outdoor
sensor . The reception symbol
ture panel 3 .
NOTE
If no outdoor temperature is displayed within around 3 minutes,
the weather station will stop the reception search . The reception
symbol goes out and
outdoor temperature panel 3 .
It is possible that no signal can be received due to the sur-
rounding buildings or because the distance is too great .
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
Press and hold the –/CH button 6 until the reception
♦
signal
♦ Press the TX button o to initiate the outdoor sensor
radio signal manually .
The weather station automatically starts to receive the MSF
signal after 3 minutes irrespective of whether the outdoor sensor
reception search has been successful or not . The reception
symbol flashes on the time panel 5 .
If the reception symbol is not flashing completely ( ) on the
display, this means that the reception of the MSF signal is too
weak and the time cannot be synchronised . Try to find a set-up
location in which the reception symbol flashes completely ( )
on the display .
AFW 2 A1
flashes on the outdoor temperature panel 3 .
flashes on the outdoor tempera-
and are displayed on the
GB │ IE │ NI │
13 ■