Scope Of Delivery; Certificates And Approvals; Registered Trademarks - Endress+Hauser Levelflex M FMP45 Operating Instructions Manual

Levelflex M FMP45 4 to 20 mA HART
"
Endress+Hauser
2.2

Scope of delivery

Caution!
It is essential to follow the instructions concerning the unpacking, transport and storage of
measuring devices given in the chapter "Incoming acceptance, transport, storage", Page 10!
The scope of delivery consists of:
• Assembled device
• Accessories (→ ä 65)
• Endress+Hauser operating program on the enclosed CD-ROM
• Brief operating instructions KA00189F/00/A2 (basic setup/troubleshooting), housed in the
device
• Brief operating instructions KA01044F/00/EN for quick commissioning
• Approval documentation: if this is not included in the operating manual
• CD-ROM with further documentation, e.g.
– Technical Information
– Operating Instructions
– Description of Instrument Functions
2.3

Certificates and approvals

CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EG directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.4

Registered trademarks

® ®
KALREZ , VITON , TEFLON
Registered trademark of the company, E.I. Du Pont de Nemours & Co., Wilmington, USA
®
TRI-CLAMP
Registered trademark of the company, Ladish & Co., Inc., Kenosha, USA
®
HART
Registered trademark of HART Communication Foundation, Austin, USA
®
PulseMaster
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
®
Identification
9