Receiver (Amplifier) Hookups - Sony DVP-S9000ES Operating Instructions Manual

Receiver (Amplifier) Hookups

This connection is for listening to the sound through
speakers connected to a receiver lacking a built-in DTS,
Dolby* Digital or MPEG audio decoder. Refer as well to
the instructions supplied with the component to be
connected.
z
If you have a digital component with a built-in DTS, Dolby
Digital or MPEG audio decoder
You can enjoy multi-channel surround sound by connecting the
component via the DIGITAL OUT OPTICAL or COAXIAL
connector using an optical or coaxial digital connecting cord (not
supplied). For details on hookups and settings, see page 14.
AUDIO OUT
R
2
1
Y P
2 2 B
1 1
VIDEO S VIDEO
OUT OUT
To S VIDEO OUT To AUDIO OUT
: Signal flow
12
DIGITAL OUT
L PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL COAXIAL
COMPONENT VIDEO OUT
/C P /C SCAN SELECT
B R R
SELECTABLE
INTERLACE
PROGRESSIVE
To
To DIGITAL
DIGITAL
OUT
OUT
(OPTICAL)
(COAXIAL)
Take off the
cap.
or or
To coaxial digital input
To optical digital input
Do not connect the mains lead to a switched mains such
as the mains on a receiver (amplifier). Doing so may cause
the Playback Memory, Disc Memo and menu settings to be
cancelled when you turn off the receiver.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
VIDEO
To S VIDEO
input
L
AUDIO
R
DIGITAL IN
COAXIAL
OPTICAL
CD
L
R
To audio input
SACD/DVD player
To an AC outlet
INPUT
S VIDEO
TV
Receiver
(Amplifier) with
a digital
connector, MD
deck, DAT deck,
etc.
Receiver
(Amplifier)