Receiver (Amplifier) Hookups - Sony DVP-S525D Operating Instructions Manual

Receiver (Amplifier) Hookups

This connection is for listening to the sound through
speakers connected to a receiver (amplifier such as an
integrated stereo amplifier, a receiver having a built-in
Dolby Pro Logic decoder, etc.). Refer to the instructions
supplied with the component to be connected.
You can enjoy 5.1 channel surround sound by connecting
a receiver (amplifier) with 5.1 channel inputs. See page
32.
z
You can enjoy surround when connecting front speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (Virtual Enhanced Surround). For details, see page
32.
CD/DVD player
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS/
DOLBY DIGITAL (AC-3)
To LINE
OUT
(AUDIO)
: Signal flow
10
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
S VIDEO COMPONENT VIDEO OUT
LINE OUT
OUT
R–AUDIO 1–L VIDEO 1
1
C /B–Y C /R–Y
Y B R
2
R–AUDIO 2–L VIDEO 2
To S VIDEO
OUT
To S VIDEO input
To audio input
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
White (L)
Red (R)
5.1CH OUTPUT
FRONT REAR CENTER
L
R
WOOFER
TV
INPUT
VIDEO
S VIDEO
L
AUDIO
R
Receiver (Amplifier)
CD
L
R
Note
You cannot enjoy the picture with S video signal if your TV is not
conformed to the S video signal. When your TV does not have S
VIDEO input, connect the component via the VIDEO INPUT
connector using the video connecting cord (not supplied) instead
of the S video cord. For details, see page 8.
Refer to the instructions supplied with your TV.
White (L)
Red (R)
To an AC outlet