Sony DVP-S9000ES Operating Instructions Manual page 70

Troubleshooting
, If the color system of your DVD player does not
match with that of your TV, change the color
system of the player. For details, see page 9. (You
cannot change the color system of the DVD disc
itself.)
Even though you set the aspect ratio in "TV
TYPE" in "SCREEN SETUP" of the setup display,
the picture does not fill the screen.
, The aspect ratio is fixed on your DVD.
Sound
There is no sound.
, Check that the player is connected securely.
, The audio connecting cord is damaged. Replace it
with a new one.
, Make sure you connect the player to the audio
input connectors on the receiver (amplifier). (page
12)
, Make sure you turn on the TV and the receiver
(amplifier).
, Make sure you select the appropriate input on the
receiver (amplifier) so that you can listen to the
sound from the player.
, The player is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
, The player is in fast forward or fast reverse mode.
Press H to return to normal play mode.
, Check the speaker connections and setting (page
15, 62). Refer to the operating manual of your
receiver (amplifier).
, If you use the DIGITAL OUT connectors, set
"DIGITAL OUT" to "ON" in the setup display.
Otherwise no sound will come from the DIGITAL
OUT connectors. (page 62)
, SACD audio signals are not output from the
DIGITAL OUT OPTICAL or COAXIAL connectors.
, While playing a Super VCD which has no audio in
track 2, no sound will come out when you select
"2:STEREO," "2:1/L" or "2:2/R."
Sound is noisy.
, Clean the disc.
, When you play a CD with DTS sound tracks, noise
will come from any connector other than the
DIGITAL OUT OPTICAL or COAXIAL connector.
(page 19)
Sound distortion occurs.
, In the setup display, set "AUDIO ATT" in "AUDIO
SETUP" to "ON." (page 62)
70
The sound loses its stereo effect when you play a
VIDEO CD or a CD.
, Set "AUDIO" to "STEREO" in the Control Menu
display. (page 35)
, Make sure you connect the player correctly. (pages
10, 12, 14)
Operation
The remote does not function.
, Remove any obstacles between the remote and the
player.
, Use the remote near the player.
, Point the remote at the remote sensor
player.
, Replace all of the batteries in the remote with new
ones if they are weak.
The disc does not play.
, There is no disc inside ("Insert disc." appears on
the TV screen).
Insert a disc.
, Insert the disc correctly with the playback side
facing down on the disc tray.
, Clean the disc.
, The player cannot play CD-ROMs, etc. (page 7)
Insert a DVD, a VIDEO CD, or CD.
, Check the region code of the DVD. (page 5)
, Moisture has condensed inside the player. Remove
the disc and leave the player turned on for about
half an hour. (page 8)
The player does not play from the beginning
when playing a disc.
, Program Play, Shuffle Play, Repeat Play or A-B
Repeat Play has been selected. Press CLEAR.
(pages 45 through 49)
, Resume Play has been selected.
Press x on the front panel or on the remote before
you start playing. (page 23)
, A title menu or a DVD menu automatically
appears on the TV screen when you play your
DVD, or a setup display automatically appears on
the TV screen when you play your VIDEO CD
with PBC functions.
The player starts playing the disc automatically.
, The DVD features the auto playback function.
, "AUTO PLAY" in "CUSTOM SETUP" is set to
"TIMER." (page 57)
Playback stops automatically.
, The disc may contain an auto pause signal. While
playing such a disc, the player stops playback at
the signal.
on the