Settings For The Speakers (Speaker Setup) - Sony DVP-LS785V Operating Instructions Manual

Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the same
level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
26).
Select "SPEAKER SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 80). Set the following
items in the order that they are explained
below. The default settings are underlined.
Example: DVP-LS785V
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT) :
LEVEL(REAR) :
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To make adjustments for Super Audio CDs
(DVP-NS955V only)
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs.
1
Follow steps 1 to 4 of "Using the Setup
Display" (page 80) to select "SPEAKER
SETUP" in the Setup Display.
2
Select "DVD" or "SUPER AUDIO CD"
using X/x, the press ENTER.
3
Set the following items in the order that
they are explained below. The default
settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the "SIZE" setting does not return to the
default setting.
OFF
LARGE
LARGE
LARGE(REAR)
YES
SIZE
Selects the size of the speakers.
• FRONT
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
• CENTER
LARGE Normally select this position.
SMALL Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
a centre speaker.
• REAR
LARGE (REAR/SIDE): Normally select
this position. Select according
to the rear speaker position*.
SMALL
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear. Select according to the
rear speaker position*.
NONE Select this if you do not connect
rear speakers.
* Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
• Set to "SIDE," if the location of the rear speakers
corresponds to section A below.
• Set to "REAR," if the location of the rear speakers
corresponds to section B below.
This setting affects only "VIRTUAL REAR
SHIFT," "VIRTUAL MULTI REAR," and
"VIRTUAL MULTI DIMENSION" mode
(page 55). This setting does not affect the Super
Audio CD Multi audio signals.
90
45
20
,continued
87