Adjusting the Delay
Between the Picture and
Sound (AV ALIGNMENT)
(DVP-NS955V only)
When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
CLEAR
DISPLAY
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
ALIGNMENT), then press ENTER.
The following display appears.
1 ( 1 2 )
1 ( 2 6 )
T
0 : 0 0 : 0 2
0 ms
SET
3
4
5
To reset the "AV ALIGNMENT" setting
Press CLEAR in step 4.
ENTER
C/X/x/c
Note
This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL) jack
and set "DOLBY DIGITAL," "DTS," or "MPEG"
in AUDIO SETUP to "DOLBY DIGITAL,"
"DTS," or "MPEG" respectively (page 86).
(AV
DVD VIDEO
Press x to select "SETc", then
press ENTER.
The "AV ALIGNMENT" adjustment bar
appears.
AV ALIGNMENT
Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
Press ENTER.
The selected setting takes effect.
0ms
61